Valhalla 2

    £4890

    (price for 1m Power Cord)

     

    While Valhalla 2 cables remain true to the Nordost design philosophy, using silver-plated, OFC solid core conductors, extruded FEP insulation, a mechanically tuned construction, and asymmetrical grounding, the advances made from that jumping-point are astounding. V2 cables use Dual Mono-Filament technology, along with an innovative, proprietary connector called the HOLO:PLUG®, designed to be the best possible interface between the cable and component. The combination of these two ground-breaking technologies allows Nordost products to perfectly match their philosophy of low mass design, optimal signal transfer and perfect impedance matching.

     

    Please contact your nearest Nordost dealer for all prices.

    Discover the Valhalla 2 Series of cables

    Available in this series:

    • Power Cord
    • Analogue Interconnect
    • Tonearm Cable +
    • Digital Interconnect
    • USB 2.0 cable
    • 4K UHD cable
    • Ethernet cable
    • Speaker cable
    • Bi-Wire Jumpers

    Click on tabs below for more details.

     

     

     

     

    • Dual Mono-Filament construction
    • 15 amp (US) / 13 amp (UK) / 10 amp (EU, AUS) IEC
    • standard
    • 7 x 16 AWG silver plated 99.999999% OFC
    • solid core conductors
    • FEP insulation
    • 8pF/ft Capacitance
    • 1.3 Ohms per 1,000ft/304m
    • US, EU, UK, AUS connectors available
    • Add £90.00 for 16 amp (EU, UK, AUS)
    • Add £55.00 for 90 degree wall plug
    • Add £320.00 for Low Profile HOLO:PLUG® IEC-C15
    • Add £50.00 for 90 degree IEC
    • Add £60.00 for Furutech Figure 8
    • Add £60.00 for Powercon Connector

    £4890 for 1m (add £990 per additional 1 meter)

    Read more about the Valhalla 2 Power Cord here.

    • Comes as a PAIR of cables
    • Dual shielded silver braid analog interconnect 10 x24 AWG silver plated 99.999999% OFC solid core conductors
    • Dual Mono-Filament design
    • 17.0pF/ft capacitance
    • HOLO:PLUG® RCA or HOLO:PLUG® XLR termination (note: retermination unavailable)
    • Add £35.00 per 5-pin or 4-pin Din connector

    £7440 for 1m (add £1070 per additional 1/2 meter)

    Available from 0.6m at £6400.

    MONO cable available at 1/2 cost + 10%

    Read more about the Valhalla 2 Analogue Interconnect here.

    • High purity 1.11 extruded Fluorinated Ethylene Propylene (FEP) insulation
    • Mechanically tuned lay and lengths
    • 4 x 24 AWG silver plated 99.999999% OFC solid core conductors:
      • o2 Twisted pairs individually shielded.
      • Dual Mono-Filament design.
    • 24 AWG silver-plated, stranded OFC bond wire w/ Micro Mono-Filament design
    • 24 AWG silver-plated, stranded OFC removable ground whips w/ Micro Mono-Filament design
    • Velocity of Propagation: 87%
    • Tonearm cables are available with straight HOLO:PLUG® din, HOLO:PLUG® RCA, or HOLO:PLUG® XLR connectors. Standard model numbers reflect a straight HOLO:PLUG® din to HOLO:PLUG® RCA.
    • Add £90 for 90 degree HOLO:PLUG® din connector

    £4670 for 1.25m (add £580 per additional 1/2 meter)

    Read more about the Valhalla 2 Tonearm here.

    • Dual Mono-Filament technology
    • Propagation delay: 89% speed of light

    75 Ohm:

    • 75 Ohm S/PDIF digital cable terminated with HOLO:PLUG® BNC and supplied with gold plated RCA adaptors
    • 16 AWG silver plated 99.999999% OFC solid core conductor
    • Coaxial design
    • 15.3pF/ft capacitance

    110 Ohm:

    • 110 Ohm AES/EBU digital cable terminated with HOLO:PLUG® XLR Two 18 AWG silver plated 99.999999% OFC solid core conductors
    • Balanced design
    • 10.5pF/ft capacitance

    £3200 for 1.25m, £4700 for 2m (add £1160 per additional 1 meter)

    Read more about the Valhalla 2 Digital Interconnect here.

    • Dual Mono-Filament construction
    • 2.0 standard
    • 4×19 AWG solid core, silver-plated 99.999999% OFC conductors
    • Flat, Twin-axial design
    • Mechanically tuned lengths
    • Individually shielded power and signal conductors
    • Gold plated HOLO:PLUG® class A and class B Connectors (standard is A to B)

    £3230 for 1m (add £1110 per additional 1 meter)

    Read more about the Valhalla 2 USB 2.0 cable here.

    • High purity class 1.003 extruded Fluorinated Ethylene Propylene (FEP) insulation
    • Mechanically tuned lay and Micro Mono-Filament construction, twin-axial shielded pair design
    • 19 x 24 AWG silver-plated 99.999999% solid core OFC conductors
    • 100% Total shield coverage
    • Velocity of Propagation: 86% Speed of Light
    • Terminated with gold-plated, shielded, 19 pin, type A, High Definition connectors
    • Approvals: DPL 4K Certification

    £2770 for 1m (add £920 per additional 1 meter)

    Read more about the Valhalla 2 4K UHD cable here.

    • 8 X 23 AWG Solid Core Conductors
    • Twisted Pair Design
    • Triple-shielded: Screen foil and Dual Braid
    • Mechanically tuned lengths
    • High density polyolefin insulation
    • Extremely high bandwidth
    • Specialised EMI and ESD resistant gold-plated 8P8C/RJ45 connectors

    £2670 for 1m (add £350 per additional 1 meter)

    Read more about the Valhalla 2 Ethernet cable here.

    • Comes as a PAIR of cables
    • Fully manufactured and terminated in the USA
    • Shotgun configuration only
    • 28 x 22 AWG silver plated 99.999999% OFC solid core conductors
    • Dual Mono-Filament design
    • 10.9pF/ft capacitance
    • 0.125μH/ft inductance
    • HOLO:PLUG® spade or Nordost Z-type banana termination

    £9420 for 1.25m, £11620 for 2m (add £1470 per additional 1/2 meter)

    MONO cable available at 1/2 cost + 10%

    Read more about the Valhalla 2 Speaker cable here.

    • Set of 4 Jumpers
    • 14 x 22AWG silver plated 99.999999% OFC solid core conductors
    • Dual Mono-Filament design
    • 10.9pF/ft capacitance
    • 0.125μH/ft inductance
    • HOLO:PLUG® spade or Nordost Z-type banana termination

    £2420 for 13.5” / £4850 for 27”

    Read more about the Valhalla 2 Bi-Wire Jumpers here.

    © 2021 Renaissance Audio