Turntables

    Player

    £1500

    The VPI Player is the first all in one high-end entry level turntable.  Complete with a headphone amplifier, phonostage, and pre-mounted Ortofon 2M Red cartridge on a 9 inch Gimballed / Yoke bearing tonearm, it is the perfect solution to enjoying your records!

    Player in Walnut

    It has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers. The Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for!

    It is also now available in two finishes: Hard Rock Maple and Mocha Walnut.

    Key Features:

    • Ortofon 2M Red
    • Headphone Amp
    • Aluminum Platter
    • 300 RPM Motor
    • 1.25”” thick textured vinyl covered non-resonant MDF chassis.

    • 16″ x 11″ footprint

    • 19” x 14” x6” overall size

    • Aluminum Platter

    • Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling.

    • The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.

    • New 9” vertical Yoke type tonearm with lateral turntable type bearing.

    • Pivot to spindle: 223mm

    • Effective length: 240.7mm

    • Overhang: 17.7mm

    • Offset angle: 22.85 degrees

    • Average RMS distortion: .36%

    • VTA adjustable arm mount.

    • Damped stainless steel armtube.

    • Very pure copper wire, twisted with special insulating jacket.

    • The armbase is upgradeable to a standard JMW 9 arm.

    Type                              Belt drive (manual turntable)

    Motor                            24v synchronous AC motor

    Turntable Platter         Aluminum

    Diameter                      11.81” (30.0 cm)

    Turntable Speeds        33.3 RPM and 45 RPM

    Wow and Flutter           .1% WRMS (in accordance with DIN specification)

    Rumble                         < – 80dB (IEC 98A unweighted)

    Cartridge                      Ortofon 2M Red

    Output                          5 mV @ 1 KHz

    Tracking Force             1.5 grams (recommended)

    Input Load                   47K

    Weight                          5.5 grams

    Power Supply              110v VAC @ 60 Hz, 230v VAC @ 50hz

    Power Consumption  7.7 watts at full output

    Dimensions                 18.5” (470 mm) W x 13.5” (343 mm) D x 4.3” (109 mm)H

    Weight                          12.9 lbs. (5.9 kg)

    © 2018 Renaissance Audio