Heimdall 2

    £620

    (price for 1m power cord)

     

    Nordost’s Heimdall 2 cables are the first tier in Nordost’s mid-range, Norse 2 family. In addition to the already impressive core design, Heimdall 2 cables use innovative techniques and technologies that were first seen in the acclaimed and much sought after Valhalla and Odin ranges. Advances such as Dual Mono-Filament technology and mechanically tuned lengths as well as specially designed, proprietary MoonGlo connectors all make appearances throughout the Heimdall 2 range. Just by taking the first step into the Norse 2 family you will notice significant differences in your sound. With the switch of even one cable you’ll hear banal recordings transform into high fidelity performances.

    Available in this series:

    • Power Cord
    • Analogue Interconnect
    • iKable
    • Tonearm
    • Headphone cable
    • Ethernet cable
    • Digital Interconnect
    • USB 2.0 cable
    • 4K UHD cable
    • Speaker cable

    Click on tabs below for more details.

    • Micro-Mono Filament construction
    • 15 amp (US) /13 amp (UK) / 10 amp (EU, AUS) IEC
    • 3 x 16 AWG silver plated 99.99999% OFC solid core conductors
    • FEP insulation
    • 10pF/ft capacitance
    • 4.0 Ohms per 1,000ft/304m DC Resistance
    • Fitted as standard with Furutech UK mains plug
    • Add £50.00 retail for 90 degree wall plug
    • Add £50.00 retail for Low Profile IEC (straight or 90°)
    • Add £50.00 retail for 90 degree IEC
    • Add £60.00 retail for Figure 8
    • Add £60.00 retail for Powercon Connector

    £620 for 1m (add £200 per additional 1 meter).

    Read more about the Heimdall 2 Power Cord here.

    • Comes as a PAIR of cables
    • Shielded analog interconnect with 97% braid
    • 4 x24 AWG silver plated 99.99999 OFC solid core conductors
    • Dual Mono-Filament design
    • 25.0pF/ft capacitance
    • 0.06μH/ft inductance
    • Nordost MoonGlo RCA or Neutrik XLR termination
    • Add £30.00 retail per 5-pin or 4-pin Din connector

    £910 for 1m (add £200 per additional ½ meter pair)

    MONO cable available at 1/2 cost + 20%

    Read more about the Heimdall 2 Analogue Interconnect here.

    • 4 x 24 AWG stranded silver-plated 99.99999% OFC conductors
    • Dual Mono-Filament technology
    • High performance, low dielectric FEP insulation
    • Mechanically tuned lengths
    • Gold plated, full metal jacket shell connectors available in:
      • 3.5mm stereo mini (Neutrik) to 3.5mm stereo mini (Neutrik)
      • 3.5mm stereo mini (Neutrik) to (2x) XLR (Neutrik)
      • 3.5mm stereo mini (Neutrik) to (2x) RCA (Nordost MoonGlo)

    £450 for 1m (add £190 per additional 1 meter)

    Read more about the Heimdall 2 iKable here.

    • 4 x 24 AWG silver plated 99.99999 OFC solid core conductors
    • Mono-Filament design
    • 26 AWG drain wire
    • 25.0pF/ft capacitance
    • 0.06μH/ft inductance
    • Tonearm cables are available with straight din, RCA, or XLR connectors. Standard model numbers reflect a straight din to RCA.
    • Add £50.00 retail for 90 degree din connector – Must specify pin orientation.

    £610 for 1.25m (add £95 for additional ½ meter).

    Read more about the Heimdall 2 Tonearm here.

    • 32 AWG 7/40 Litz Wire Construction
    • Micro Mono-Filament technology
    • Low dielectric FEP insulation
    • Mechanically tuned lengths
    • Gold plated contact points

    £740 for 2m.

    Please contact us for all the available termination options, adaptors and extension cables.

    Read more about the Heimdall 2 Headphone cable here.

    • 23 AWG solid core copper conductors
    • Screened Foiled Twisted Pair Design (s/ftp)
    • Fully Shielded Dual Braid
    • High-Density Polymer Insulation
    • Mechanically tuned lengths
    • Cable speed up to 1000 MHz
    • Terminated with ruggedized, shielded 8p8c/RJ45 connectors

    £650 for 1m (add £140 per additional 1 meter)

    Read more about the Heimdall 2 Ethernet cable here.

    • Micro Mono-Filament technology

    75 Ohm:

    • 75 Ohm S/PDIF digital cable terminated with BNC
    • BNC to RCA adapters are included
    • 20 AWG silver plated 99.99999% OFC solid core conductor
    • Coaxial design

    110 Ohm:

    • 110 Ohm AES/EBU digital cable terminated with Neutrik
    • XLR Two 20 AWG silver plated 99.99999% OFC solid core conductors
    • Balanced design

    £710 for 1m (add £150 per additional ½ meter)

    Read more about the Heimdall 2 Digital Interconnect here.

    • Newly optimized Dual Mono-Filament construction
    • 2.0 standard
    • 4×20 AWG Silver plated 99.99999% OFC stranded conductors
    • Optimized cable geometry and length
    • Available with class A or Class B connectors (standard is A to B)

    £460 for 1m (addd £90 per additional 1 meter)

    Read more about the Heimdall 2 USB 2.0 cable here.

    • High purity class 1.003 extruded Fluorinated Ethylene Propylene (FEP) insulation
    • Mechanically tuned lay and Micro Mono-Filament construction, twin-axial shielded pair design
    • 19 x 25 AWG silver-plated 99.99999% solid core OFC conductors
    • 100% Total shield coverage
    • Velocity of Propagation: 86% Speed of Light
    • Terminated with gold-plated, shielded, 19 pin, type A, High Definition connectors
    • Approvals: DPL 4K Certification

    £550 for 1m (add £185 per additional 1 meter)

    Read more about the Heimdall 2 4K UHD cable here.

    • Comes as a PAIR of cables
    • Shotgun configuration only
    • 18 x 22 AWG silver plated 99.99999% OFC solid core conductors
    • Mono-Filament design
    • 9.8pF/ft capacitance
    • 0.14μH/ft inductance
    • Banana or spade termination
    • Add £10.00 retail ea. for Large Spades (8.5mm) or Small Spades (5mm)

    £1410 for 1m (add £410 per additional 1 meter pair)

    MONO cable available at 1/2 cost + 20%

    Read more about the Heimdall 2 Speaker cable here.

    Where to buy

    Newsletter sign-up

    © 2019 Renaissance Audio